User manual TBK-NVR5004 TBK-VISION PLUS
25
www.tbkvision.com
③
Go to alarm handling setting by click “Setting” button under Trigger. Then go to “To
Record” tab. You can select the recording channel and click “OK” button to confirm the
settings.
④
Set schedule for motion alarm. The setting steps are similar to normal schedule recording
(See
Chapter 6.3 Schedule Recording
for details).
Note: The timelines of these two schedules (schedule for motion based recording and
schedule for motion alarm) must match, otherwise you will not get the record in some
time).
6.5 Sensor Based Recording
①
Set schedule for sensor based recording. Go to Main Menu
Setup
Schedule
Sensor.
Select channel and then set the schedule. The settings steps of schedule for sensor based
recording are similar to normal schedule recording (See
Chapter 6.3 Schedule Recording
for details).
②
Go to Main Menu
Setup
Alarm
Sensor
Sensor to see the following figure. (
The
IPC shall support this function and the channels here are IPC alarm inputs.
) Enable
sensor alarm and choose the sensor type.
