P-5004-TBW Form 1174 8/18
www.tbwoods.com
440 North Fifth Avenue
Chambersburg, PA 17201 - USA
888-829-6637 • 717-264-7161
ASSEMBLY
4. Assemble the coupling using figures 1 or 2 as a guide. Do not drive or force bolts into position. All nuts
must
be tight-
ened to the value shown in Table I with lightly oiled threads.
TABLE I
(Lightly oiled threads)
ALIGNMENT
5. After preliminary alignment and complete assembly, secure a dial
indicator to one hub as shown in figure (3) and indicate face of the
other hub or adapter as shown. Indicator mounting is optional.
6. Rotate the coupling to find minimum indicator reading. Set the
indicator for zero reading.
7. Again, rotate the coupling 360° to check misalignment.
8. Adjust position of connected equipment until indicator reading is
within the allowable variation shown in Table II.
Fig. 3
TABLE II
Total indicator reading inches.
IMPORTANT: To ensure unlimited life re-check alignment after a short period (one to two hours)
of actual running. At this time also re-torque bolts and nuts to values to Table I. If
equipment is portable this should be done each time the equipment is moved.
WARNING
ROTATING EQUIPMENT IS POTENTIALLY
DANGEROUS AND MUST BE PROPERLY
GUARDED. THE USER SHOULD COMPLY
WITH APPLICABLE SAFETY CODES IN
ACCORDANCE TO OSHA STANDARDS.
TB Wood’s Incorporated
440 North Fifth Avenue
Chambersburg, Pennsylvania 17201-1778
Telephone: 888-TBWOODS or 717-264-7161
FAX: 717-264-6420
Website: www.tbwoods.com
Email: [email protected]
Form 1174
REPLACEMENT PARTS
To order replacement parts it is necessary to furnish the complete part number(s) and the required part(s). Order
must be placed with your distributor.
SIZE
31
35
42
45
50
55
60
70
75
80
85
92
FT-LB 10% 40
70
125 150 210 320 450 575 830 1000 1400 1400
±
SIZE
31
35
42
45
50
55
60
70
75
80
85
92
TIR
.004
.004
.005
.006
.006
.007
.008
.009
.010
.011
.012
.013
ASSEMBLY
4. Assemble the coupling using figures 1 or 2 as a guide. Do not drive or force bolts into position. All nuts
must
be tight-
ened to the value shown in Table I with lightly oiled threads.
TABLE I
(Lightly oiled threads)
ALIGNMENT
5. After preliminary alignment and complete assembly, secure a dial
indicator to one hub as shown in figure (3) and indicate face of the
other hub or adapter as shown. Indicator mounting is optional.
6. Rotate the coupling to find minimum indicator reading. Set the
indicator for zero reading.
7. Again, rotate the coupling 360° to check misalignment.
8. Adjust position of connected equipment until indicator reading is
within the allowable variation shown in Table II.
Fig. 3
TABLE II
Total indicator reading inches.
IMPORTANT: To ensure unlimited life re-check alignment after a short period (one to two hours)
of actual running. At this time also re-torque bolts and nuts to values to Table I. If
equipment is portable this should be done each time the equipment is moved.
WARNING
ROTATING EQUIPMENT IS POTENTIALLY
DANGEROUS AND MUST BE PROPERLY
GUARDED. THE USER SHOULD COMPLY
WITH APPLICABLE SAFETY CODES IN
ACCORDANCE TO OSHA STANDARDS.
TB Wood’s Incorporated
440 North Fifth Avenue
Chambersburg, Pennsylvania 17201-1778
Telephone: 888-TBWOODS or 717-264-7161
FAX: 717-264-6420
Website: www.tbwoods.com
Email: [email protected]
Form 1174
REPLACEMENT PARTS
To order replacement parts it is necessary to furnish the complete part number(s) and the required part(s). Order
must be placed with your distributor.
SIZE
31
35
42
45
50
55
60
70
75
80
85
92
FT-LB 10% 40
70
125 150 210 320 450 575 830 1000 1400 1400
±
SIZE
31
35
42
45
50
55
60
70
75
80
85
92
TIR
.004
.004
.005
.006
.006
.007
.008
.009
.010
.011
.012
.013
