FUNCTION CODE
[ 20 ] ADD A USER CODE(S)
A user code (pin number) is set up by the programming code and can be used to unlock the lockset.
FUNCTION CODE
[ 21 ] ADD SINGLE ENTRY CODE(S)
A single-use user code is set up by the programming code and can only be used once to unlock the lockset.
STEP 1
FUNCTION CODE
[ 20 ] ADD A USER CODE(S)
FUNCTION CODE
[ 21 ] ADD SINGLE ENTRY CODE(S)
The lockset will exit the programming mode and resume
to the stand-by status if no input is made in 10 seconds.
PROGRAMMING
ENABLE/DISABLE THE GUIDING CODE
The guiding code is a set of random numbers to be entered on the keypad
before entering the user entry code.
FUNCTION CODE
[ 22 ]
STEP 1
Press (SET) for 1 second
Enter preset programming
code 1-2-3-4-5-6-7-8 or current
programming code
STEP 2
STEP 3
STEP 4
TURN OFF
0
1
TURN ON
!
The lockset will exit the programming mode and resume to the stand-by status if no input is made in 10 seconds.
1 2 3
4 5 6
7 8 9
c 0
2
2
+
+
+
+
+
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
24
