1. Unpack components from the box (see components list to the left).
2. You will find four perforated holes on the counter mat. These align with the suction cups on the bottom of the Xpress Flex
device. Pop out the excess material and place the mat on the counter.
3. Place Xpress Flex device on the counter mat aligning suction cups. Press down on device.
4. Place Flex Strips and prep reagents in designated holders on top of the Xpress Flex device.
5. Go to
retail.sureTREAT.com
. If you already have a sureTREAT account, please log in and proceed to
step 6. If you do not have
a sureTREAT account, please see the attached instructions to create one. (Be sure you are using the most up to date version of
Windows (Windows 10) before proceeding.)
6. After logging into
retail.sureTREAT.com
, download the XFConnect software. You can find this by choosing
Support
on the
bottom navigation bar and then selecting
Download XFConnect
. Run the
XF Connect Installer
.
7. Ensure that the XFConnect software is running. Connect the USB cord from the Xpress Flex device to your computer.
8. Now that your system is set up, please watch this short video to learn about the Xpress Flex testing process:
taylortechnologies.com/en/content/xpress-flex-support
9. You are ready to start Flexing! Thank you for trusting Taylor Technologies with your testing needs.
Your Xpress Flex device will be automatically registered for warranty when you perform your first water test.
QUICK START INSTRUCTIONS
Contact us at www.TaylorTechnologies.com or call 800-TEST KIT (837-8548) if you have any questions or feedback.
Summary of Contents for Xpress Flex
Page 1: ...QUICK START GUIDE...
Page 8: ...5010 rev B 11 08 21...
