Treasure Chest Assembly Instructions- Continued
•
Insert
Cam Posts
in holes on edge
of
Side
. This maybe a tight fit. Some
minor adjusting and fitting may be
needed.
•
Insert 3
Cam Locks
into the Cam Lock
holes on the side component . The
arrow head on the face of the Cam
needs to be pointing toward the head
of the Cam Post.
•
Turn the Cam 1/2 turn Clockwise
until cam stops.
•
Now, repeat steps 2 and 3 to
assemble the other side.
•
Use a #2 Phillips head screwdriver to screw
in 3
Cam Posts
to each side of
Back
.
•
Each cam post must be fully seated and
perpendicular.
•
Repeat steps 1, 2 and 3 to attach
Front
panel to body
1
2
3
4
5
6
Page 2 of 3
Partial view of Side
•
Using the existing holes, attach bottom of
Lid Support
to inside of Back with 2
#8 x 5/8”
screws
•
Place
Lid
on top of the box and line
up existing holes located on outside
of the back panel to holes in hinge.
Attach hinge to back of box using 14
#5 x 5/8”
screws.
•
Be careful not to over tighten screws.
Bottom
Arrow Head
Bottom Panel
Panel Groove
Cam Post Holes
Cam Lock Holes
Body
Lid
Back
Top
Lid Support
Back Panel
Area of Detail
Quality Wooden Children’s Furniture and Accessories
Made in America
•
Now that you have the two sides
fastened to the back; slide the
bottom
panel in the bottom grooves
(The side with the logo is the top
side).
