3
taylormadeproducts.com/wavemaker
574-537-8900
Rev:06.05.20
Taylor Made
®
Exciter Speaker
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0003868
Installation
DO NOT INSTALL THE EXCITERS IN LOCATIONS
WHERE THEY COULD OBSCURE THE DRIVER’S VIEW.
NOTE:
Read all steps before proceeding with installation.
1.
Make sure the watercraft is dry-docked or otherwise
secured to avoid an unstable condition created by waves.
2.
Locate mounting areas for the Exciters. The Exciters
should be positioned near the bottom and/or vertical trim
(Fig.1)
to provide an optimal path for the wires.
Fig.1
optimal exciter
position for the
wing glass
optimal exciter
position for the
front glass
3.
After mounting locations have been determined, clean
those areas thoroughly with rubbing alcohol and a clean
lint-free cloth.
4.
Carefully remove the protective film covering the
adhesive on the three support pads and center driver on
the front of the Exciter
(Fig.2)
.
Fig.2
support pad
support pad
center driver
support pad
NOTE:
After the adhesive is exposed, do
NOT
touch the
adhesive surfaces.
5.
Slowly move the Exciter into position against the glass,
making sure there is even contact
(Fig.3)
.
Fig.3
watercraft installation
UTV installation
