V
-
21A
9
SAFETY
PROTECT YOURSELF AND OTHERS !
Read and understand these safety notices.
1. ELECTRICAL
No portion of the outer cover of the welding controller should be removed by
anyone other than suitably qualified personnel and never whilst mains power is
connected. ALWAYS disconnect the mains plug from the socket.
BE AWARE !
Capacitors store electrical energy. Check for residual
charge before carrying out any internal maintenance.
DO NOT !
use any fluids to clean electrical components as these
may
penetrate into the electrical system
Installation must be according to the setting up procedure detailed on
page 12 of this manual and must be in line with national, regional and local safety
codes.
2. FIRE
During welding small particles of very hot metal are expelled. Ensure that no
combustible materials can be ignited by these.
3. LIMITATIONS OF USE
The mass of the welding controller is between 16 and 18.5kg dependant on
the model purchased and as such is suitable to be manhandled. The controller is
not suitable for use in rain or snow or in an environment with increased risk of
electric shock.
Summary of Contents for CD-MULTIGUN
Page 28: ...V 21A 28 CIRCUIT SCHEMATIC...