Weekly Cleaning
(continued)
©McDonald’s Corporation · Australia · Planned Maintenance Manual · Revised November, 2013
Page 2 of 7
Ta
ylor Company Blended Ice Machine Model C029 -
Australia
Weekly
BE 22 W1
6
Remove ice hopper cover.
7
Remove ice from ice hopper.
Using an ice scoop, remove as
much ice as possible.
Note: Use caution when
removing ice near the
shaver blade area.
Reinstall the ice hopper
cover.
Press the ICE key until all
remaining ice has dispensed
into the blender pitcher.
8
Remove the blender pitcher
and discard the ice.
Remove the blender pitcher
and discard the ice into the
back sink.
9
Remove the ice hopper, ice
hopper cover, splash guard,
and ice chute for cleaning.
10
Remove additional parts for
cleaning.
•
Blender pitchers
•
Skirt
•
Syrup rail
•
Rinse station assembly
(grate, actuator, strainer)
•
Pitcher drying station
(pitcher grate, drip pan)
•
Lid holders
•
Whipped cream holder
and cover
11
Remove the product bins for
cleaning.
Remove the product bags
from the product bins and
place them in the walk-in
refrigerator.
12
Remove the product bin
shelves and the bottom
cabinet drip pan for cleaning.
13
Wash, rinse and sanitize all
parts.
Wash, rinse and sanitize all
parts in the 3-compartment
sink.
DO NOT PLACE IN
POWER SOAKER SINK OR
DISHWASHER.
Important:
Make sure the
water is fresh and clean.
APC & Sanitizing solutions
