Batteries
The thermometer incorporates visual low battery indication as follows:
‘Battery OK’: measurements
are possible
‘Battery Low’: batteries needs to be
replaced, measurements are possible
‘Battery Exhausted’:
measurements are not possible
>
>
>
>
>
>
Specification
Infrared Scan function
(IRT Mode)
Thermocouple Probe (K type, Grounded)
(COT Mode)
Measurement Range
-55~250°C (-67~572°F)
-55~330°C
(-67 to +626
o
F)
Operating Range
0~50°C (32~122°F)
Accuracy
(Tobj=15-35°C, Tamb=25°C)
+/-0.6°C (1.1
o
F
)
Accuracy
(Tobj=above -33°C)
-33~0:+/-(1°C+0.1/degree)
0~ 65: +/-1°C
65~200:+/-1.5% of reading
below -5 :+/-1°C
-5~ 65 : +/-0.5°C
above 65 :+/-1% of reading
Resolution (-9.9~199.9°C)
0.2°C/0.5°F
0.2°C/0.5°F
Dimension
22.18*38*190.09mm
Weight (with battery)
98.1g
Battery Life Typically 40 hours, minimum 30 hours continuous use (auto power off after 15 seconds)
CAUTION:
Since the thermometer is
splash proof, please make sure the battery
cover and rubber stopper are on tight.
Readings may be affected if the unit is operated within a radio frequency electromagnetic field strength of
approximately 3 volts per meter, but the performance of the instrument will not be permanently affected.
1.
Please pick out the rubber stopper on the battery cover by carefully using a small, pointed tool, such
as a screwdriver. Then remove the screw that is under the rubber stopper.
2.
Remove the battery compartment cover.
3.
Replace the 2 AAA 1.5V batteries.
4.
Replace the battery compartment cover.
5.
Replace the screw and the rubber stopper.
When the 'Low Battery' icon indicates the battery is low, the batteries should be replaced immediately.
Please note: It is important to turn the instrument off before replacing the batteries, otherwise the
thermometer may malfunction. Dispose of used batteries properly and keep away from children. Do not
dispose of batteries in fire, as they may explode or leak.
Two Year Limited Warranty
EMC/RFI
Taylor Precision Products
2220 Entrada Del Sol
Las Cruces, New Mexico 88001, Suite A
Customer Service Phone: 1-800-225-4834
Customer Service Fax: 1-575-526-4347
www.taylorusa.com
There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
For additional product information, or warranty information in Canada or elsewhere outside the USA, please
contact us through www.taylorusa.com.
©2008 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and Leading the Way in
Accuracy® are trademarks of Taylor Precision Products and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
NOT LEGAL FOR TRADE
This product is warranted against defects in materials or workmanship for two (2) years from date of
original purchase for the original purchaser. It does not cover damages or wear resulting from accident, misuse,
abuse, or unauthorized adjustment and/or repair. Should this product require service (or replacement at our
option) while under warranty, please pack the item carefully and return it prepaid, along with receipt showing date
of purchase and a note explaining reason for return to:
9306 8.08-R2
