Taylor 1743, Instruction Manual

Page: 9 / 16

9
SILENCING THE ALARM
While the alarm is sounding, press any button except the “ SNZ ” button or press and
hold the “ SNZ ” button for 3 seconds to silence the alarm.
SNOOZE FUNCTION
While the alarm is sounding, press the “ SNZ ” button once to activate the snooze
function. The alarm sounds again after the snooze time has passed.
In snooze mode, press any button except the “
SNZ ” button or press and hold the “ SNZ ”
button for 3 seconds to exit snooze mode.
NOTE: If the snooze function is set to OFF while the alarm is sounding, pressing “ SNZ ”
will not activate the snooze function.
MAXIMUM/MINIMUM TEMPERATURE/RELATIVE HUMIDITY
To toggle between indoor/outdoor maximum, minimum temperature and humidity
data…
Press the “
MEM
” button once to show the maximum temperature and humidity values.
Press the “ MEM ” button twice to show the minimum temperature and humidity values.
Press the “ MEM ” button three times to return to the current temperature and humidity
levels.
To reset the maximum and minimum temperature and humidity, press and hold the
“ MEM ” button for 2 seconds. This will reset all minimum and maximum data recorded to
the current displayed values.
NOTE: If the temperature reading is below range, “LL.L” will be displayed. If the
temperature reading is above range, “HH.H” will be displayed.
LOW BATTERY INDICATOR
If the battery icon “ ” appears in the “IN” column, replace the Base Station battery.
If the battery icon “ ” appears in the “OUT” column, confirm which channel is
prompting the low battery warning and replace the corresponding Wireless Outdoor
Sensor battery.