Taylor 1743, Instruction Manual

Page: 7 / 16

7
WIRELESS OUTDOOR SENSOR TRANSMISSION
When the Base Station successfully receives signals from the Wireless Outdoor Sensor,
the temperature and humidity of the OUTDOOR are displayed on the Base Station’s
OUTDOOR column.
The Base Station can connect up to 3 channel Wireless Sensors. Multiple Wireless
Sensor’s cannot have the same channel at the same time.
Press the “
+ ” button to switch in between the channel displays of the outdoor
temperature and humidity. When “ ” appears, the channel display will change every 5
seconds.
If the Base Station fails to receive transmission signals from the Wireless Outdoor
Sensor (“- -“ appears on the LCD), press and hold the “ + ” button to receive
transmission manually. The outdoor temperature will show the RF antenna symbol “ ”
and the Base Station will re-receive the signal from the Outdoor Sensor.
Note : When the Wireless Outdoor Sensor has different channels set up, the Base
Station OUTDOOR will also want to switch to the same channel. When the channel does
not have a wireless sensor signal transmission, “- -” will be displayed in the channel
on the Base Station.
MANUAL TIME SETTING
Press and hold the “ SET ” button for 2 seconds, the temperature display flashes. Use
the “ + ” or “ - “ buttons to select °F or °C. Press “ SET ” to confirm.
The barometric pressure display flashes. Use the “ + ” or “ - “ buttons to set the pressure
unit in hPa/mb, inHg or mmHg. Press “ SET ” to confirm.
The 12/24 hour mode display flashes. Use the “ + ” and “ - ” buttons to set the correct
12/24 hour mode. Press “ SET ” to confirm.
The time zone flashes. Use “ + ” and “ - ” buttons set a correct time zone (-12 to +12).
Press “ SET ” to confirm.
The hour display flashes. Use “ + ” and “ - ” buttons to set the correct hour. Press “ SET ”
to confirm.
The minute display flashes. Use “
+ ” and “ - ” buttons to set the correct minute. Press
“ SET ” button to confirm.
The month and date display flashes. Use “ + ” and “ - ” buttons to set the date display on
month/date or date/month. Press “ SET ” button to confirm.
The year display 2017 flashes. Now use “ + ” and “ - ” buttons to set the correct year.
Press “ SET ” button to confirm.
The month display flashes. Use “ + ” and “ - ” buttons to set the correct month. Press
“ SET ” button to confirm.
The date display flashes. Use “ + ” and “ - ” buttons to set the correct date. Press “ SET ”
button to confirm.