Setup:
Place the base unit as close as possible to the remote sensor dur-
ing setup.
This will ensure the best reception of signals as you set up your
wireless forecaster.
Location:
Position the base unit and remote sensor within the effective
transmission range of 100 feet (30 meters).
Place the base unit indoors in a well-ventilated location away
from direct sunlight.
Place the remote sensor in a dry, shaded area. Direct sunlight
will heat the casing and inflate temperatures readings.
Important:
Though the remote unit is weather resistant, it should be
placed away from direct sunlight, rain, snow and should never
be submerged in water.
Note:
The effective range is greatly affected by the building
materials and where the base and remote units are positioned.
Try various set ups for the best results. Check to make sure the
transmission path is clear of obstacles and interference. Shorten
the distance between base and remote units when necessary.
Placement:
Table stand – use to sit the units on a flat surface,
such as a desk or countertop.
Keyhole – use to hang on a wall.
Tips
8
Keyhole
Table stand
Back View
8