Maintenance:
Keep the machine in good condition. Main-
tain it as directed in this manual and the
motor manual for propane machines. Check
fasteners and hydraulic hose connections
at the end of each day of operation. Check
the oil level and fill if necessar y. Tighten
and repair as necessar y. Before doing any
maintenance, turn machine of f and discon-
nect from power supply.
Hood Opening Procedure
1. You will need;
3⁄4" wrench, 1 each
2. Shut machine of f.
3. Remove the blade clamp.
4. Remove hand fastener on fan cover box
and lift the box assembly up and out, being
careful not to damage the electrical connec-
tion to the fan.
5. While holding the box assembly, release
the connector clip to disconnect the electrical
wiring from the box assembly.
6. Remove the two (2) 1⁄4" bolts that
secure the control levers. These bolts do
not have nuts as the cover holds them in
place.
7. Under the rear por tion of the seat, you
will find a metal cross member that joins
each side of the machine's weights.
Completely remove this cross member by
removing the two (2) 1⁄2" bolts.
8. Locate the two clips on the back side of
the frame adjacent to the propane regu-
lator and release them.
Maintenance and Storage
4
