Taylor Tools Bronco 260 Electric Owner'S Manual Download Page 20

Roofing Equipment, Inc., a California corporation that does

business under the name “Taylor Tools” (the “Company”),

hereby warrants to the original purchaser, on and subject

to the terms described herein, that the Product shall be

free of defects in material and workmanship for a period of

1 year from date of purchase (the “Limited Warranty”). In

the event the Company determines that a failure is related

to defects in material or workmanship and the conditions

of this Limited Warranty set for th below apply, the

Company at it's discretion will accept the responsibility to

correct or replace the defect at its cost. Par ts and labor

will be free of charge for one (1) Year from the date of

purchase. The method of correction will be determined in

the reasonable discretion of the Company and, where

necessar y, will include materials and labor provided by a

dealer or a repair company designated by the Company.

Purchaser Responsibilities:

Purchaser shall provide maintenance and adjustments and

shall have complied with the procedures and recommenda-

tions described in the Operators / Instruction Manual. The

Company makes no representation or warranty with

respect to the useful life of the Product which will depend

on the manner in which it is used, something the Company

cannot control. The Purchaser must understand that frequent

heavy-duty use of the Product will shor ten its useful life.

Transpor tation charges to deliver the Product to and from

the place where the warranty repair will be per formed are

the responsibility of the Purchaser.

The Limited Warranty:

This Limited Warranty contains all of the terms of the

warranty being provided in connection with the Product. No

person is authorized to make any changes or additions to

the terms set for th herein unless they are set for th in

writing and signed by an officer of the Company. The Product

is sold as a business rather than as a consumer product.

If there is a defect in the materials or workmanship

covered by this Limited Warranty, the Company's sole

obligation shall be repair and replacement as described

herein. In no event will the Company be liable or responsible

to the purchaser, other contractors on the job, or the owner

or lender of the building for any damages in excess of the

cost described herein. This limitation applies to damages

of any kind, including any direct or indirect damages, lost

profits, lost savings, lost of use or cost of capital, or other

special, incidental, exemplar y, punitive, or consequential

damages whether for breach of contract, tor t, or other wise

or whether arising out of the use of or the inability to use

the product or system. This Limited Warranty runs only in

favor of the original purchaser identified in a Product

Registration card properly and timely sent to the Company

and shall not apply to nor can it be enforced by any

assignees, successors or subsequent purchasers of the

product. This Limited Warranty is limited; thus the terms

and conditions of the Limited Warranty should be reviewed

and understood before purchasing the Product.

Notice of Claim:

In order to evaluate the likely cause of any claimed defect

and, if the coverage provided herein applies, to correct any

such defect, a claim under this Limited Warranty must be

in writing and shall be sent to the Company at the address

set for th below (“Notice of Claim”) within thir ty days from

the date such defect or defective condition is first noticed

or becomes apparent (“Claim Date”). A longer period of

time elapsing between the Claim Date and the Notice of

Claim may result in the inability of Company to determine

the nature and extent of such defect, and the Company

reser ves the right to disallow any Notice of Claim not made

within such period. Following receipt of the Notice of Claim,

representatives of the Company shall be entitled to make

such inspections and tests with the full cooperation of the

original purchaser as may be necessar y to determine the

cause of the claimed defect. The right to inspect the

product and the continued cooperation of those involved

shall be necessar y in order for coverage herein to apply.

This Limited Warranty requires timely written notification

of any claimed defect or claim hereunder.

Failure to

notify the Company promptly of any such claim may void

the coverage provided by this Limited Warranty. Notice

of Claim should be sent or faxed to: Taylor Tools 5045

Paris Street, Denver, CO 80239

Exclusions of Warranty:

No warranty is extended on any Product that has been

altered, misused, mis-assembled, improperly adjusted,

neglected or damaged by accident, shipping, handling,

warehousing, lack of routine maintenance, or failure to follow

the provisions and recommendations in the Instruction

/Operating Manual. No warranty is extended for ser vice

completed by someone other than an Authorized Dealer

designated by the Company. The Company reser ves the

right to incorporate any change in design into its products

without obligation to make such changes on products

previously manufactured.

DISCLAIMER OF FURTHER WARRANTY

The Company makes no other warranty, express or implied,

other than this Limited Warranty. The implied warranties of

merchantability and fitness for par ticular purpose are

limited to one (1) year as described herein, or, to the

extent permitted by law, are hereby disclaimed. The repair

or replacement of par ts that prove to be defective in

material or workmanship shall be the exclusive remedy for

breach of this warranty. To the extent permitted by law, the

Company shall not be liable for incidental or consequential

damages including but not limited to damages for incon-

venience, rental or purchase of replacement equipment,

or for loss of profits or other commercial loss, resulting

from a breach of this warranty. Some states do not allow

limitation on how long an implied warranty lasts, and some

states do not allow the exclusion or limitation of incidental

or consequential damages, so the above limitation and

exclusion may not apply to you. This Limited Warranty gives

you specific legal rights, and you may also have other

rights which var y from state to state.

1 Year Limited Warranty

18

Summary of Contents for Bronco 260 Electric





















Reviews: