Taylor-Dunn SS-025-34, Service And Parts Manual

Page: 105 / 134

Replacement Parts
Page 105
* Not available at time of printing
MS-534-13
SS and MX Models, DC System
Item No. Part No. Description Qty
- 30-114-00 Motor pulley, 2.25” dia -
- 30-115-00 Motor pulley, 2.75” dia -
- 30-116-00 Drive pulley, 8” dia -
- 30-117-00 Drive pulley, 11” dia -
-- 30-601-00 Drive belt (8” pulley) 2
- 30-613-00 Drive belt (11” pulley) 2
Axle Assembly, 3rd Member, SS-534
Item No. Part No. Description Qty
1 ** 3rd member Housing (1.784 ID Carrier Bearing) 1
2 88-119-80 3/8” NF Nut 14
3 ** Differential Assembly 1
4 80-128-00 Carrier Bearing Race 2
5 80-512-00 Carrier Bearing 2
6 31-234-50 Ring and Pinion Gear Set , 3.00 ratio 0 or 1
31-239-00 Ring and Pinion Gear Set , 5.43 ratio 0 or 1
7 41-997-00 Oil Plug 3
8 41-296-00 Rear End Housing 1
9 80-554-00 Pinion Bearing 2
10 41-711-00 Pinion Housing Shim 1
11 80-702-00 O-Ring 1
12 ** Pinion Housing 1
13 16-419-00 .002 Shim (Add Shims As Needed) -
16-420-00 .010 Shim (Add Shims As Needed) -
16-411-00 .005 Shim (Add Shims As Needed) -
14 16-415-00 Spacer 1
15 80-125-00 Pinion Bearing Race 2
16 ** Differential Bearing Adjuster Nut 2
17 88-080-04 5/16” X 3/8” NC Hex Bolt 2
18 88-140-16 1/2” X 2” Hex Bolt 2
19 96-243-00 7/16” X 7/8” Hex Bolt (Locking Head) 10
Not Shown 45-339-00 Oil Seal, Pinion Shaft 1
41-701-00 Roll Pin, Spider Gear Shaft 1
** 44-340-92 Kit,3rd member housing and differential
AXLE ASSEMBLY, BELT DRIVE, SS-534