manualshive.com logo in svg

Taylor-Dunn 212037, Operator'S Manual

Share
Download
Taylor-Dunn 212037 Operator'S Manual Download Page 28

Page 28

TT-316 Curtis AC System Operator Manual 

TT-316-07

Stopping

Release the throttle pedal and use your right foot to press the brake pedal. The amount of force 

required to stop the vehicle will vary depending on the environment and load on the vehicle.
Unless in an emergency, do not turn the start witch OFF until the vehicle has come to a complete 

stop. This vehicle is be equipped with an optional electromagnetic park brake. Turning the start 

switch OFF will immediately engage the brake and abruptly stop the vehicle; If this is done while 

is still in motion then it will result in accelerated wear of the park brake.

Parking

1. 

Bring the vehicle to a stop at an authorized parking space.

2.  Place the Direction Control switch in the center OFF position.

3. 

Confirm the parking brake is applied.

4.  Turn the start switch OFF.

5.  Remove the key from the Start switch. The driver should keep the key in his/her possession.

Note:  If parking this vehicle on an incline, turn the wheels to the curb, or block the wheels.

Material Handling 

Safety Light

This light is optional and may not be installed on your vehicle.
The safety light is a blue light projected onto the ground in front of the vehicle. The light is projected   

and visible only when the forward direction is selected.
The light helps in notifying others that a vehicle is approaching from behind or when crossing a 

blind intersection. The light is not visible outdoors in bright light. 
The distance of the projected light in front of the vehicle can be adjusted by pivoting the projector 

up or down.

Drivers should not become complacent when operating a vehicle equipped with the 

safety light.
Always be aware of pedestrians and other vehicles in your lane of travel and stop at all 

blind intersections.
Relying solely on the safety light for warning others in your path may result in collision 

with pedestrians or other vehicles causing severe bodily injury and/or property damage.

WARNING

Summary of Contents for 212037





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands