manualshive.com logo in svg

Taylor-Dunn 212037, Operator'S Manual

Share
Download
Taylor-Dunn 212037 Operator'S Manual Download Page 18

Page 18

TT-316 Curtis AC System Operator Manual 

TT-316-07

Vehicle Controls

1: Start Switch

The Start switch turns the vehicle electrical 

control system ON. This switch may or may 

not require a key to operate. Rotate the switch 

clockwise to turn the vehicle system “ON” and 

counterclockwise to turn the vehicle system 

“OFF”. The vehicle will not run when in the 

OFF position.
The switch should be in the “OFF” position 

whenever the operator leaves the driver’s seat.
This switch is designed to secure and disable 

the vehicle. The key can only be removed when 

the switch is in the “OFF” position. 

2: Directional Control Switch

This switch determines the direction of travel. 

The switch has three positions:

• 

FORWARD

: Rotate the switch clockwise 

to travel forward.

• 

REVERSE

: Rotate the switch counter-

clockwise to travel reverse.

• 

OFF

: There is a center position between 

forward and reverse, this is the “direction” 

OFF position. The direction OFF position 

does 

NOT

 turn the vehicle control system 

OFF. Use the Start switch to turn the 

vehicle control system OFF. Refer to Start 

Switch in this section for details regarding 

turning the vehicle control system OFF.

Note: The OFF position IS NOT neutral and 

does NOT disconnect the motor from 

the drive train.

3: System Status Indicator Gauge

Detailed description of operation can be found 

later in this section.

4: 

Headlight 

Switch

Push the forward side of the headlight switch 

down to turn the lights on. Push the opposite 

side of the switch down to turn the lights off. 

5: Foot Brake Pedal

The  foot brake pedal is located to the left of 

the throttle pedal. This pedal is designed for 

operation with the drivers right foot. It works 

similar to the brake in an automobile. Applying 

pressure to the brake pedal slows the vehicle 

according to the amount of pressure applied. 

Relieving pressure from the pedal releases the 

braking action. 

6: Throttle Pedal

The throttle pedal is located to the right of the 

brake pedal. It controls the speed of the vehicle 

and operates similar to the throttle pedal in an 

automobile. Press the pedal to increase speed 

and release the pedal to decrease speed.

7: 

Horn 

Switch

Press the horn switch with your left foot to sound 

the horn, release it to turn it off.

Summary of Contents for 212037





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands