Taylex ABS4200, Installation Manual

Page: 9 / 13

Page 9 of 13
8. ELECTRICAL CONNECTION

The electrical contractor must follow the electrical specification
supplied with the ABS 42 00 system

Ensure all electrical works are only completed by licenced persons.

Ensure all electrical work is completed and compliant with AS/ANZ 3000.
Refer to Electrical Specifications on Page 12 & 13
9. COMMISSIONING
Please ensure the following is completed prior to having the system commissioned

Tanks is full of water (5,000lt each)

Effluent Disposal area is installed

Effluent Disposal Area feed line is connected to ABS 42 00 (Tank 2)

Electrical power is connected (Tank 1 & 2)

Drains connected (main sewer into tank 1 and connection between Tank 1 & 2)
IMPORTANT: The Taylex ABS 42 00 System cannot be commissioned unless power is
connected to the system.
The ABS 42 00 will then be switched on (commissioned) by an Employee of Taylex Australia ,
a Taylex Accredited Distributor (TAD) or a Taylex Accredited Service Technician (TASA).