12. Alarm Codes
A high water level may be self correcting. It can be caused by the washing machine
discharging at the same time as the bath is being emptied and the dishwasher is pumping
out. If you think this may have occurred, then wait for 15 minutes until the surge flow has
stopped and see if the alarm stops. If it does not then check the following:
a.
Is there a filter in the outlet line before the sprays or drippers? Is it blocked?
b.
Is the irrigation line kinked or broken?
c.
Has the irrigation pump failed?
If you can rectify any of these problems yourself, then you will save the call out cost of your
Service Provider. However, they are experts in this field and will assist you whenever you
need their help. Call them whenever you need their assistance or you are in doubt about
what you need to do. They will happily assist you over the phone.
Taylex ABS Home Owners Manual
©Copyright J
une
201
7
