2.
General
Your Taylex ABS is designed to operate automatically and its operation will usually be
event free. The Control Panel provides visual and audible indictors of both normal
operating conditions and fault conditions. The illustration on the previous page provides
description markers that correspond with the following description of their operation.
A.
POWER OFF/ON
. Once your Taylex ABS has been commissioned, this
switch must remain ON at all times.* If it is turned OFF no treatment will take
place and no alarms will function.
B.
DISPLAY.
This is a 9 digit display that describes normal and abnormal
conditions by using a numerical code 1 – 9. See later in this document to
understand their meaning.
C.
MUTE ALARM.
This is a “soft touch” key that when pressed, silences the
audible alarm for a period of 24 hours.
D.
CIRCUIT BREAKER.
This is a resettable electrical overload that protects
your air pump in the event of an excess draw of current. When “tripped” or
“open” the square button will protrude from the face of the Control Panel. An
audible alarm consisting of 5 consecutive “beeps” will sound, the Strobe Light
(E) will flash 5 times consecutively and the number 2 will be displayed on the
Display (B)
E.
STROBE LIGHT
. This is a high intensity red light, mounted on the top of the
Control Panel, that flashes in unison with the audible alarm to make you
aware of a fault condition.
Taylex ABS Home Owners Manual
©Copyright J
une
201
7
