tayco Kip, Installation Manual

Page: 18 / 25

Kip community table – 2 Surfaces
Figure 4
Figure 5
Tools & Hardware Needed
8540-1278 8540-0644_CAM
Drill Flat Screw Driver Phillips Bit Combi Dowel, (8X) CamFix (20X)
5.
Attach the combi dowels by
screwing them into the pre-
bored holes, (Figure 4).
6.
Insert the CamFix into the holes
of the gables, (Figure 5).
Continued on the next page >>
FEBRUARY 2020 kip 15