tayco Kip, Installation Manual

Page: 13 / 25

Kip community table – 1 Surface
Figure 13
Figure 13A
Tools & Hardware Needed
8540-0789_SCREW
Drill Robertson # 2 #10 X 1" Pan Head
Screw
WARNING – To reduce the risk of
fire, electric shock, or injury to
persons:

For indoor use only.

Do not use with extension
cords.

Do not try to open the unit
for any reason.
31.
Set the power grommet into
the hole and then secure it with
mounting screws provided,
(Figure 13).
Note: Make sure that the unit
is securely installed to the
mounting surface.
32.
Affix the faceplate by pressing
it against the main unit.
33.
Place the USB charger on the
desired surface and use two
screws to fasten it onto the
wood surface.
Note: USB chargers are extra.
34.
Lay-in the electrical wires and
communication cables inside
wire troughs, (Figure 13A).
35.
Plug the power cord(s) or
adapter to nearest wall or floor
outlet.
Continued on the next page >>
FEBRUARY 2020 kip 10