Multi-Storage Unit
Tools & Hardware Needed
8540-1013
Drill
Right Angle Drill
Philips Bit
Tape Measure
Torpedo Level
#10-3/4" Pan Head
Screw
When installing multi-storage units,
install the middle storage first and
spread out to the sides.
1.
Position storage leg over pilot
holes in underside of storage
unit 1; attach storage leg by
inserting (10) #10-3/4" Pan
Head Screws into the pilot holes
and tighten, (Figure 1).
Note:
For storage unit 54” wide
and up, attach single storage leg
to the middle in underside of
storage unit. Please see
Application Guide for storage
leg placement.
2.
Repeat
Step 1
to install for each
leg required.
3.
Carefully turn storage unit
upright position.
4.
Level the storage unit from
front to back and side to side by
rotating the adjustable glide
counterclockwise to extend the
glide and raise the storage unit,
(Figure 2).
Note:
The storage unit should
be precisely level prior to
joining other storage unit.
Continued on the next page >>
STORAGE UNIT 1
SINGLE STORAGE LEG
SHARED STORAGE LEG
ADJUSTABLE GLIDE
1
2
3
4
3
2
1
2
2
3
2
4
4
Figure 1
Figure 2
May 2023
halifax 49
Summary of Contents for Halifax
Page 1: ...Halifax installation guide May 2023...
Page 55: ...tayco com 05 23...
