INTERFACOM, S.A.
I3000100.DOC
7
3. SEALING (Drawing 6)
3.1.- SEALS OF THE TX30
The sealing of the taximeter TX30 is totally made on the left of the frontal part of the
taximeter, preventing from reaching the screws that block the accesses.
See details of the taximeter drawing below:
1 2 3
Seal Nº1: corresponds to the sealing of the box of the taximeter. Therefore it
seals the electronic plate.
Seal Nº2: seals the back cover of the connectors, that is, it seals the whole
installation of the taximeter, assembly, as well as electrical installation.
Seal Nº3: seals the cover of the tariff charger connector, which is located just on
the right hand side of this seal.
3.2.- TYPES OF SEALS (Drawing 6)
In order to adapt to all legislations, there are two options of sealing, that can be
used for any of the 3 seals of the TX30 taximeter.
A OPTION: Stamped lead seal and / or plastic seal
- For this type of seal, a flat square has to be used, in which the
stamped lead or plastic seal has to be fitted.
- The sealed screw cannot be reached without breaching the seal.
B OPTION: with seal for cable
- For this type of seal, you have to use a seal plate together with a screw
with a pierced head.
- A cable is passed through the pierced hole of each element and is
then sealed.
- The sealed screw cannot be reached without breaching the cable that
goes through the screw with pierced head.