14
English
15
English
14
English
15
English
Installation
Warning Indicator
When the “LAMP” indicator lights solid red, the projector
will automatically shut itself down. Please contact your local
reseller or an authorized service center.
When the “TEMP” indicator lights solid red for about 15
seconds, it indicates the projector has been overheated. The
projector will automatically shut itself down.
Under normal conditions, the projector can be switched on
again after it has cooled down. If the problem persists, you
should contact your local reseller or an authorized service
center.
When the “TEMP” indicator fl ashes red, it indicates the fan
failed. Please contact your local reseller or an authorized
service center.
Powering Off the Projector
1. Press the “Power/Standby” button to turn off the projector
lamp, you will see a message
displayed on the projector’s screen. Press the “Power/
Standby” button again to confi rm, otherwise the message
will disappear after 25 seconds.
2. The cooling fans continue to operate for about 60 seconds for
cooling. When the Power LED begins fl ashing, the projector
has entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
“Power/Standby” button to restart the projector.
3. Disconnect the power cable from the electrical outlet and the
projector.
4. Do not turn on the projector immediately following a power
off procedure.
