Woolly Bear
Assembly Instructions
STEP 4
Detail
For each riser leg,
-Install two bolts from outside.
-Install two bolts from top plane.
-Tighten all nylocks until they are
well seated.
(See drawings)
nylocks inside
cargo deck
STEP 2
Detail
Installation of removable hitch.
- Remove 2 through bolts and nuts attached to removable hitch
- Remove single black bolt from bottom of removable hitch
- Use WD-40 to lubricate all 4 sides of removable hitch, then insert into the receiving hole
for hitch on the chassis. (Battery box facing up)
- Align holes on removable hitch with holes on the receiving end of the chassis.
- Insert through bolts with washer on both sides, and torque to 80 lb-ft using a ¾” ratchet
wrench and ¾” socket wrench.
-Tighten the black bolt until it is well seated.
page 2/2
through bolt
washer
nylock
washer
black bolt
nylock on bottom
of cargo deck
for 2 person tent
6-7 empty holes in
between risers
1 empty
hole
passenger
side view
