TAVRIDA ELECTRIC VCB Series, User Manual

Page: 64 / 142

64
Installation and adjustment of CBkit_Interlock_3 in the Switchgear is shown in the Figure 112
– Figure 118.
Install CBdet_Stopper_2 on the
CBunit_Interlock_1(1) with help of
StandDet_Screw_DIN912(M10_20_Fe88-Zn)
from the delivery kit of CBkit_Interlock_3. The
orientation of CBdet_Stopper_2 depends on the
way of next installation of CBunit_Interlock_1(1).
During fixation of
StandDet_Screw_DIN912(M10_20_Fe88-Zn) the
rod of CBunit_Interlock_1(1) shall not be loaded
by torque, the wrench shall be used for rod
unloading.
Figure 112
Installation of CBdet_Stopper_2 on the CBunit_Interlock_1(1)
Figure 113
Installation of CBunit_Interlock_1(1) for variant with one or with two straddling disconnectors