Taurus TTA-11241, Instruction Manual, Page: 15 / 24

Assembly (Cont.)
Mounting the Worktable for use
with the Belt Sander (Fig
lOA,
Fig.
lOB, Fig. 10C):
•
To use the work table for vertical
sanding:
Disassemble the worktable:
•
Loosen and remove the head screw
and the washer as shown in Fig.
lOA.
•
Loosen and remove the head screws
and the washers as shown in Fig. lOB
and Fig. 10C.
•
Remove the worktable
(4).
Fig.
lOA
Fig. lOB
Fig.l0C
After Sales Support Tel: 1300-355-255
13