Taurus TORSO ROTATION IT95, Owner'S Manual

Page: 30 / 39

Step 6
1. Attach three 4.5" Pulleys (#19) to the Weight Stack Frame ASSY (#1) using:
three M10*50 SHCS (#35) six Φ11*Φ20*2 Flat Washer (#46)
three M10 Nylon Lock Nut (#50)
2. Attach the Cable ASSY (#60) to the Top Plate (#23) and the Wheel Frame ASSY (#6)
using:
one Short bushing (#31) one Nylon Lock Nut M8 (#52)
one Cap (#48) one Cable Connecting Frame (#15)
one Aluminium Sheath Φ14.5*27 (#74)
Note: Wrench tighten bolts and Nylon Lock Nuts.
Step 7
Tips: Pre-assemble eight M6*20 Cross Recessed Pan Head Screws into the Weight Stack
Frame ASSY and Bottom Bracket ASSY, not wrench tighten Bolts, Assemble the shroud
with the bolt on.
1. Attach the Front Shroud (#56) and the Left Front Shroud (#57) to the Weight Stack
Frame ASSY (#1) and the Bottom Bracket ASSY (#13) using:
four M6*20 CRPHS (#44) two M6*16 CRPHS (#43)
2. Attach the Rear Shroud (#58) to the Weight Stack Frame ASSY (#1) and the Bottom
Bracket ASSY (#13) using:
four M6*20 CRPHS (#44) two M6*16 CRPHS (#43)
3. Attach the Training Placard Cover (#54) to the Weight Stack Frame ASSY (#1) and the
Top Bracket ASSY (#12) using:
two M6*20 CRPHS (#44) two M6*10 CRPHS (#42)
4. Attach the Top Rear Shroud (#55) to the Weight Stack Frame ASSY (#1) and the Top
Bracket ASSY (#12) using:
four M6*20 CRPHS (#44)
5. Attach the Top Cover (#59) to the Weight Stack Frame ASSY (#1) using:
two M6*20 CRPHS (#44) two Spout Plug Φ16.5*6.88 (#63)
6. Attach the Cup Holder (#53) to the Weight Stack Frame ASSY (#1) using:
two M6*20 CRPHS (#44)
Assembly
30