AFTER SALES SUPPORT
1300 922 271
16
MODEL NUMBER: BT-SM 2534 DUAL, 12/11
10. CLEANING, MAINTENANCE
& ORDERING OF SPARE PARTS
Always pull out the power plug before starting any
cleaning work.
10.1 Cleaning
•
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible. Wipe
the equipment with a clean cloth or blow it down with
compressed air at low pressure.
•
We recommend that you clean the equipment
immediately after you use it.
•
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plastic
parts in the equipment. Ensure that no water can get
into the interior of the equipment.
10.2 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important. The carbon brushes should not be
replaced by anyone but a qualified electrician.
10.3 Servicing
There are no parts inside the equipment which
require additional maintenance.
10.4 Ordering spare parts:
Contact our After Sales Support on 1300 922 271
and quote the following data when ordering spare parts:
•
Model/type of the equipment
•
Article number of the equipment
•
ID number of the equipment
11. STORAGE
Store the equipment and accessories out of children’s
reach in a dark and dry place at above freezing temperature.
The ideal storage temperature is between 5 and 30 °C.
Store the electric tool in its original packaging.
12. DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled.
The equipment and its accessories are made of
various types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your local council.