AFTER SALES SUPPORT
1300 922 271
12
MODEL NUMBER: BT-SM 2534 DUAL, 12/11
4. ITEMS SUPPLIED (Figs. 1-3)
•
Open the packaging and take out the equipment
with care.
•
Remove the packaging material and any
packaging and/or transportation braces
(if available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until the end
of the guarantee period.
Important!
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts.
There is a danger of swallowing or suffocating!
•
Sliding mitre saw
•
3 x Saw blades (1 mounted, 2 additional blades)
•
Clamping device (8)
•
2 x workpiece support (10)
•
Sawdust bag (22)
•
Allen key (c, d)
•
User guide
•
Quick Start Guide
•
Warranty card
•
Warranty sticker
5. INTENDED USE
The sliding mitre saw is designed to cut wood and plastic
respective of the machine’s size. The saw is not designed
for cutting firewood.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.
The equipment is to be operated only with suitable
saw blades. It is prohibited to use any type of cutting
off wheel.
To use the equipment properly you must also observe
the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have
to be acquainted with these operating instructions
and must be informed about the equipment’s potential
hazards. It is also imperative to observe the accident
prevention regulations in force in your area. The same
applies for the general rules of health and safety at work.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes. Even when the equipment is used
as prescribed it is still impossible to eliminate certain
residual risk factors. The following hazards may arise in
connection with the machine’s construction and design:
•
Contact with the saw blade in the uncovered saw zone.
•
Reaching into the running saw blade (cut injuries).
•
Kick-back of workpieces and parts of workpieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the saw blade.
•
Damage to hearing if ear-muffs are not used as
necessary.
•
Harmful emissions of wood dust when used
in closed rooms.
6. TECHNICAL DATA
AC motor:
240 V ~ 50Hz
Power:
2100 W S1 / 2200 W S6 25%
Idle speed n
o
:
4500 min-1
Carbide saw blade (mounted): ø 250 x ø 30 x 3.0 mm (48T)
Carbide saw blade (spare):
ø 250 x ø 30 x 3.2 mm (48T)
Swiveling range:
-45° / 0°/ +45°
Mitre cut to the left:
0° to 45°
Mitre cut to the right:
0° to 45°
Saw width at 90°:
340 x 75 mm
Saw width at 45°:
240 x 75 mm
Saw width at 2 x 45°
(compound mitre cut left):
240 x 42 mm
Saw width at 2 x 45°
(compound mitre cut right):
240 x 25 mm
Weight: approx.
16 kg
Laser class:
2
Wavelength of laser:
650 nm
Laser output:
≤ 1 mW
Operating mode S6 25%: Continuous operation with idling
(cycle time 10 minutes). To ensure that the motor does
not become excessively hot it may only be operated
for 25% of the cycle at the specified rating and must
then be allowed to idle for 75% of the cycle.