Taurus TF-Z9-PRO, Assembly And Operating Instructions Manual

Page: 19 / 48

1
DOWN
UP
8
22
DOWN
UP
9
22
1
8
13
10
9
10
97
12
13 12
M5*10L 97 (x1)
Z9PRO
19
2.4.2 Saddle
Vertcal Adjustment
1. Stand next to the saddle support (9) and loosen the adjustable screw (12).
2. Move the saddle to the height of your hip and re-
tighten the adjustable screw (12) at this position.
⚠
CAUTION
Do not adjust over the STOP- mark.
3. Turn the pedals in a vertical position (6 & 12
o'clock).
4. Place a foot on the lower pedal and get on the
Indoor Cycle.
Your knee should be in a slightly bent position.
L
NOTICE
+ When your leg is too straight or your foot
doesn't reach the pedal, the saddle must be lowered.
+ When your leg is bent too much, the saddle must be raised.
5. To further adjust the saddle, dismount the Indoor Cycle first.
6. When you have finished adjusting the saddle, tighten the adjustable screw (12) to fix the saddle
support (9).
Horizontal Adjustment
1. Get on the Indoor Cycle and turn the pedals in a horizontal position (6 & 12 o'clock).
Your front knee should now be slightly in front of the axle of the pedals.
L
NOTICE
+ When your knee is too far forwards, the saddle must be re-positioned backwards.
+ When your knee is behind or over the axle, the saddle must be re-positioned forwards.
2. To adjust the saddle (10) horizontally, dismount from the Indoor Cycle and loosen the adjustable
screw (12) on the saddle.
3. Move the saddle (10) forwards or backwards and re-tighten
the adjustable screw (12) at the position.
⚠ CAUTION
Do not adjust over the STOP- mark.
4. To further adjust the saddle, dismount from the Indoor Cycle
first.
5. When you have finished adjusting the saddle, tighten the
adjustable screw (12) to fix the saddle (10).
Up
Down