Taurus TF-X77, Assembly And Operating Instructions Manual, Page: 23 / 60

X7.7
23
Step 9: Assembly of the plastics
covers (handlebars)
Place the covers (L) on the
equipment according to the
illustration and mount these with
the screws (24).
Make sure that the plastics covers
align and are appropriately
connected.
Step 10: Assembly of the
plastics covers (pedals)
Connect the left and right pedal
cover (N) with the respective
pedal components. Check that all
pre-drillings on the plastics cover
align with those of the steel tube.
Mount it with the screws (25).
Then mount the left and right
cover (M) on the left and right
swing arm. Mount it also with the
screws (25).