Vibrating Fitness Roller
7
2
INSTRUCTIONS AND ERROR DIAGNOSIS
2.1
General instructions
+ Please check if all parts and tools belonging to the equipment are included in the delivery and if
there is any transport damage. If there are any complaints, please contact your contract partner
directly.
+ Do not leave any packaging materials like plastic sheeting laying around to avoid danger of
suffocation for children.
+ Modifications to the design or improper repairs may pose a hazard to the user and should not be
carried out. The product warranty may be void as a result.
+ Only authorized service technicians are permitted to carry out all servicing and/or repairs – it
excludes maintenance and care.
+ Damaged or worn components may impair your safety and the lifespan of the equipment.
You should therefore immediately replace damaged or worn components. Please contact your
contract partner in such a case. The equipment should no longer be used until it has been
repaired. When needed, only use original Taurus spare parts.
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The use of solvents
should be strictly avoided. Also, make sure that no liquids (e. g. sweat) get into the openings of
the equipment.
2.2
Faults and error diagnosis
The equipment runs through regular quality controls during production. Nevertheless, errors
or malfunctions on the equipment may occur. Individual parts are often the cause of faults and
replacement is usually sufficient. Please use the following overview to see the most common errors
and how to repair them. If the equipment still does not work properly, please contact your contract
partner.
Problem
Cause
Solution
Vibrating fitness roller
can not be turned on
1. Vibrating fitness roller is not
charged sufficiently.
2. Power cable and/or power plug
is damaged
1. Connect the vibrating fitness
roller to power supply.
2. Kontrollieren Sie das Netzkabel
und den Netzstecker auf äußere
Beschädigungen
