Taurus TF-UF, Assembly And Operating Instructions Manual

Page: 26 / 54

26
Ultra Force
Required parts for step 8:
Step 8: Assembly swivel arms and cylinder
Place yourself behind the station.
1. Slide the right swivel arm on the supportive bar on the upper crossbar of the main frame. The
label from the swivel arm points forward. Mount the right swivel arm with a large washer and
a hex head screw.
2. Lift the knob from the right adjusting unit while you slide it to the swivel arm to number 20.
The markings are located on the front side of the swivel arm. The adjusting unit is displayed to
the right and left under the knob on the backside.The markings for setting the weight must be
visible through the opening on the front side of the adjusting unit.
3. Place the lower end of the resistance cylinder on the supporting bar of the lower crossbar from
the main frame. Place the upper end of the cylinder to the outer right. Mount the lower end of
the cylinder with a small washer and a hexagon screw.