Step-2
13
15
13
1
13
UP
DOWN
2-3
2-4
2-1
2-2
19
Step 7:
Alignment of the feet
If the floor is uneven, you can stabilise the equipment by turning the adjustable screws under the
main frame.
1. Lift the equipment on the desired side
and rotate the adjustable screws under
the main frame.
2. Rotate the screws clockwise in order
to unscrew them, therefore raising the
equipment.
3. Rotate the screws counterclockwise in
order to lower the equipment.
Step 8:
Connecting the equipment to the mains supply
࣑
ATTENTION
The equipment must not be connected to a power board, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
L
NOTICE
The mains plug should only be used if the battery charge is insufficient.
Connect the adaptor (108) to the unit and then plug the adaptor (108) into a wall socket that complies
with the specifications in the chapter on electrical safety.
The adaptor included in the package is used to charge the battery, which is installed inside the
console.
Please notice the following precautions, otherwise the performance of the battery may decrease:
1. If the battery is fully discharged, it must be recharged for 8 to 10 hours.
2. If the battery is partially discharged, it must be charged for 1 to 4 hours.
3. If you do not plan to use the device for a longer period of time, charge the battery completely
before storing the device.
4. The fully charged battery must be recharged after one month of storage.
Summary of Contents for TF-UB105-2
Page 2: ...2 UB10 5...
Page 25: ...P7 P8 P9 P10 P11 P12 P1 P2 P3 P4 P5 P6 25...
Page 47: ...47...
Page 48: ...Upright Bike UB10 5 Pro...