Taurus TF-SCANDIC-X, Assembly And Operating Instructions Manual

Page: 13 / 44

SCANDIC X
13
2.4 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the
assembly in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1: Opening the box and scope of delivery
1. Open the box with a knife and lay it flat on the floor.
2. Remove all loose parts.
3. Check the scope of delivery for completeness.
L
NOTICE
We recommend not to remove the cardboard during assembly - it serves as soil protection.