Taurus TF-PTT0222, Assembly Instructions Manual

Page: 14 / 32

4 Barbell set 1
5 Left barbell rack 1
6 Right barbell rack 1
8 Protecting rack 2
22 Rubber bushing 2
26 Protective mats 2
27 Rubber bumper 2
44 Hex socket head cap screw M8*55 2
46 Hex socket head cap screw M6*20 4
51 Spring washer M6 4
54 Plain washer
φ16*φ8.4*1.6
4
58 Nylon insert lock nut M8 2
14
Studio Smith Machine
Step 3: Assembly of the Barbell Racks and Barbell Set
L
NOTICE
The barbell racks (5 & 6) are pre-assembled.
1. Slightly loosen the screws (44) and nuts (58) at the top of the left and right barbell racks (5 & 6).
2. Loosen the screws (46) and spring washers (51) at the bottom of the left and right barbell racks
(5 & 6).
3. Tilt up the left and right barbell racks (5 & 6).
4. Mount the barbell set (4) to the left and right barbell racks (5 & 6) along with two rubber bushing
(22), two protection mats (26), two protecting racks (8) and two rubber bumpers (27).
5. Remount the barbell racks (5 & 6) with the previously loosened screws (44 & 46), spring washers
(51) and nuts (58).
No. Name Specification Qty.