Taurus TF-PTT0222, Assembly Instructions Manual

Page: 12 / 32

1 Left upright 1
2 Right upright 1
3 Transverse connecting frame 1
13 Short hook column 2
39 Hex socket head cap screw M12*100 2
40
Hex socket head cap screw M12*35
6
49
Spring washer M12
8
52 Plain washer
φ24*φ13*2.5
6
56
Large washer φ37*φ13*3
2
12
Studio Smith Machine
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Upright and Connecting Frames
1. Mount the transverse connecting frame (3) onto the left and right uprights (1 & 2) with three
screws (40), three spring washers (49) and three plain washers (52) on each side.
2. Mount the transverse connecting frame (3) onto the left and right uprights (1 & 2) with one
screw (39), one spring washers (49), one large washer (56) and one short hook column (13) on
each side.
No. Name Specification Qty.