Taurus TF-PTT0211, Assembly And Operating Instructions Manual

Page: 14 / 28

3 Backrest cushion frame 1
4 Leg pad adjustment bracket 1
5 Swing span 1
6 Shaft 1
9 Leg pads 4
10 Metallurgy cover 2
14 Semi-sliding sleeve 2
15 End cap 4
34 Countersunk hex socket screws M8*30 4
35 Limiting screw 1
40 Spring washer M10 1
42 Circlip for shaft d0=25 2
14
Studio Decline Bench
Step 3: Assembly of Leg Pads
1. Insert the semi-sliding sleeve (14) into the opening of the backrest cushion frame (3).
2. Attach two leg pads (9) to the leg pad adjustment bracket (4) by using two screws (34) and two
end caps (15).
3. Insert the leg pad adjustment bracket (4) into the opening with the semi-sliding sleeve (14) and
fasten it with one screw (35) and one spring washer (40).
4. Attach two leg pads (9) to the swing span (5) by using two screws (34) and two end caps (15).
5. Attach both metallurgy covers (10) to the swing span (5).
6. Attach the swing span (5) to the backrest cushion frame (3) by using one shaft (6) and two
circlips (42).
7. Now tighten all screws.
No. Name Specification Qty.