Taurus TF-IT9519, Owner'S Manual

Page: 29 / 38

STEP 5
1. Attach two 4.5" Pulleys (#16) to the Weight Stack Frame ASSY (#1) using:
two M10*50 SHCS (#44) four Φ11*Φ20*2 Flat Washer (#52)
two M10 Nylon Lock Nut (#54)
2. Attach one 4.5" Pulleys (#14) to the Single Pulley Bracket (#13) using:
one M10*50 SHCS (#44) two Φ11*Φ20*2 Flat Washer (#52)
one M10 Nylon Lock Nut (#54)
3. Attach the two ends of the Cable 1 ASSY (#11) to the Single Pulley Bracket (#13) and
the Top Plate (#22).
4. Make the Cable 2 ASSY (#12) through the 4.5" Pulleys on Single Pulley Bracket (#13),
the 4.5" Pulleys on the Middle Connection Frame ASSY (#7), the 4.5" Pulleys on Main
Frame ASSY (#2), Then attach to the Left Arm Frame ASSY (#4) and the Right Arm
Frame ASSY (#5) using:
two Cable Connector (#34) two Cable Connector Jacket (#33)
Note: Wrench tighten bolts and Nylon Lock Nuts.
Step 6
Tips: Pre-assemble the 8 bolt into the Weight Stack Frame ASSY and Bottom Bracket ASSY,
not wrench tighten Bolts, Assemble the shroud with the bolt on. Then wrench tighten Bolts.
1. Attach the Left Front Shroud (#28) and the Front Shroud (#27) to the Weight Stack
Frame ASSY (#1) and the Bottom Bracket ASSY (#20) using:
four M6*20 CRPHS (#48) two M6*16 CRPHS (#49)
2. Attach the Rear Shroud (#29) to the Weight Stack Frame ASSY (#1) and the Bottom
Bracket ASSY (#20) using:
four M6*20 CRPHS (#48) two M6*16 CRPHS (#49)
3. Attach the Training Placard Cover (#25) to the Weight Stack Frame ASSY (#1) and the
Top Bracket ASSY (#19) using:
two M6*20 CRPHS (#48) two M6*10 CRPHS (#50)
4. Attach the Top Rear Shroud (#26) to the Weight Stack Frame ASSY (#1) and the Top
Bracket ASSY (#19) using:
four M6*20 CRPHS (#48)
5. Attach the Top Cover (#24) to the Weight Stack Frame ASSY (#1) using:
two M6*20 CRPHS (#48) two Spout Plug Φ16.5*6.88 (#38)
Note: Wrench tighten bolts.
Assembly
29