Taurus TF-IC90PRO, Assembly And Operating Instructions Manual

Page: 16 / 36

IC90 Pro
16
• When your leg is stretched too much or the foot does not touch the pedal, the saddle
needs to be lowered. When your leg is bent too much, the saddle needs to be adjusted
to a higher position.
• Get off the indoor cycle for adjusting the height and release the adjusting lever of
the seat post. Then push the seat post up or down as required.
• When the saddle is at the desired position, adjust the adjusting lever to the locked
position to secure the seat post.
• Do not make any adjustments beyond the stop markings.
Horizontal adjustment
• Sit down on the indoor cycle and rotate the pedal crank in the 3-9-o‘clock position.
When the knee joint of the leg, which points forwards, is directly above the pedal axle,
the horizontal adjustment of the seat is correct.
• Otherwise, get off the bike to adjust the saddle forwards or backwards in horizontal
direction. Release the adjusting lever on the saddle and push the seat forwards or
backwards as desired. Tighten the lever again.
• Do not make any adjustments beyond the stop markings.
ATTENTION
• For safety reasons, do not pedal backwards when a brake resistance is set.
• The machine is NOT equipped with a free wheel system. That means: When
the flywheel is rotating, the pedals rotate as well. In order to avoid knee
injuries, do not try to stop the machine by pressing backwards on the pedals.
Do not try to take off your feet from the rotating pedals. The movement can
only be stopped by using the emergency brake or by controlled reduction
of the cadence.