Taurus TF-IC90PRO, Assembly And Operating Instructions Manual

Page: 11 / 36

IC90 Pro
11
Step 1: Assembly of the front and rear base
Mount the front base (7) on the main frame (1) with the screws (3A) and the washers
(6). Make sure that the transport wheels point outwards.
Mount the rear base (2) on the main frame (1) with the screws (3) and the washers (6).
Front Back
Step 2: Assembly of the pedals
Screw the pedals (70R, 70L) very carefully
clockwise respectively anticlockwise to
the pedal crank arms (62R, 62L). A bit of
lubricating grease or oil facilitates the
screwing and might avoid damages to
the thread. The right as well as the left
pedal are marked with the letters R (=
right) or L (= left). The right pedal crank
arm is located at the same side like the
belt cover (71).