Taurus SHOULDER PRESS IT95, Owner'S Manual

Page: 27 / 36

STEP 6
1. Attach two 4.5" Pulleys (#14) to the Weight Stack Frame ASSY (#1) using:
two M10*50 SHCS (#115) four Φ11*Φ20*2 Flat Washer (#123)
two M10 Nylon Lock Nut (#125)
2. Attach two 4.5" Pulleys (#14) to the Double Pulley Bracket (#24) using:
two M10*50 SHCS (#115) four Φ11*Φ20*2 Flat Washer (#123)
two M10 Nylon Lock Nut (#125)
3. Take down one M10 Nylon Lock Nut and one M10*35 SHCS from the Tension Cable ASSY
(#10), Attach the Tension Cable ASSY (#10) to the Top Plate(#42) and the Weight Stack
Frame ASSY (#1) using:
one M10 Nylon Lock Nut (Down off) one M10*35 SHCS (Down off)
4. Make the DIP Cable (#9) through the 4.5" Pulleys on Weight Stack Frame ASSY (#1), the
4.5" Pulleys on the Double Pulley Bracket (#24), the 4.5" Pulleys on Bottom Cross Brace
ASSY (#6), the 4.5" Pulleys on Main Frame ASSY (#2), Then attach to the Left Arm Frame
ASSY (#4) and the Right Arm Frame ASSY (#5) using:
two Cable Connector (#102) two Cable Connector Jacket (#101)
Note: Wrench tighten bolts and Nylon Lock Nuts.
Step 7
Tips: Pre-assemble the 8 bolts into the Weight Stack Frame ASSY and Bottom Bracket ASSY,
not wrench tighten Bolts, Assemble the shroud with the bolts on. Then wrench tighten Bolts.
1. Attach the Front Shroud (#53) and the Right Front Shroud (#54) to the Weight Stack
Frame ASSY (#1) and the Bottom Bracket ASSY (#22) using:
four M6*20 CRPHS (#119) two M6*16 CRPHS (#120)
2. Attach the Rear Shroud (#56) to the Weight Stack Frame ASSY (#1) and the Bottom
Bracket ASSY (#22) using:
four M6*20 CRPHS (#119) two M6*16 CRPHS (#120)
3. Attach the Training Placard Cover (#52) to the Weight Stack Frame ASSY (#1) and the
Top Bracket ASSY (#21) using:
two M6*20 CRPHS (#119) two M6*10 CRPHS (#121)
4. Attach the Top Rear Shroud (#55) to the Weight Stack Frame ASSY (#1) and the Top
Bracket ASSY (#21) using:
four M6*20 CRPHS (#119)
5. Attach the Top Cover (#51) to the Weight Stack Frame ASSY (#1) using:
two M6*20 CRPHS (#119) two Spout Plug Φ16.5*6.88 (#109)
6. Attach the Cup Holder (#92) to the Weight Stack Frame ASSY (#1) using:
two M6*20 CRPHS (#119)
Assembly
27