Taurus SESS7009, Assembly And Operating Instructions Manual

Page: 13 / 32

13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Assembly of Seat Pad Frame, Back Pad Frame and Pedal Plate Frame
1. Assemble the seat pad frame assy (4) to the floor stand frame 1 assy (1) and the floor stand frame
2 assy (2) with four screws (26), eight flat washers (37) and four nylon lock nuts (39).
2. Assemble the back pad frame assy (3) to the floor stand frame 1 assy (1) and the floor stand
frame 2 assy (2) with four screws (27), eight flat washers (37) and four nylon lock nuts (39).
3. Assemble the back pad frame assy (3) to the floor stand frame 1 assy (1) and the floor stand
frame 2 assy (2) with two screws (26), four flat washers (37) and two nylon lock nuts (39).
4. Assemble the pedal plate frame assy (5) to the floor stand frame 1 assy (1) and the floor stand
frame 2 assy (2) with four screws (27), eight flat washers (37) and four nylon lock nuts (39).
5. Assemble the pedal plate frame assy (5) to the floor
stand frame 1 assy (1) and the floor stand
frame 2 assy (2) with two screws (26),
two flat washers (37) and two spring
washers (35).
6. Tighten all bolts and lock nuts with a
wrench.