SelectaBell
Dumbbell
9
2
ASSEMBLY
L
NOTICE
The dumbbell stand is an optionally availble accessory and needs to purchased separately. The
stand is compatible with 50LB as well as the 55LB SelectaBells.
2.1
General Instructions
⚠
DANGER
+
Do not leave any tools, packaging materials such as foils or small parts lying around,
as otherwise there is a danger of suffocation for children. Keep children away from the
equipment during assembly.
⚠
WARNING
+
Pay attention to the instructions attached to the equipment in order to reduce the risk of
injuries.
⚠
CAUTION
+
Do not open the packaging when it is lying on its side.
+
Ensure to have sufficient room for movement in each direction during assembly.
+
The assembly of the equipment must be carried out by at least two adults. If in doubt, seek
the help of a third technically skilled person.
࣑
ATTENTION
+
To prevent damage to the equipment and the floor, assemble the equipment on a mat or
packaging board.
L
NOTICE
+
In order to make the assembly as simple as possible, some screws and nuts to be used can
already be pre-assembled.
+
Ideally, assemble the equipment at its later set-up place.
2.2
Scope of Delivery
At the beginning, check whether all parts belonging to the device are included in the scope of
delivery and whether damage has occurred. In the event of complaints, the contractual partner must
be contacted directly.
⚠
CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
Summary of Contents for SelectaBell TF-ADB-55
