Taurus SEBR7140, Assembly And Operating Instructions Manual

Page: 36 / 60

36
Elite Complete Trainer
Step 11: Assembly of the Accessories, Part 1
This Universal Smith Machine offers a wide variety of accessories for an ambitious training. The
accessories can be used interchangeable and as required.
1. Attach the barbell rod storage (67) to the left base frame (1) in the rearmost two holes with two
bolts (12), four washers (11) and two nuts (10).
2. Tighten the bolt connections and cap with two plastic covers (14) each.
L
NOTICE
When required, the lat pull down roller (64) can be attached to the right J-hook (65).
3. Attach the lat pull down roller (64) to the right J-hook (65) with the pre-assembled T-shaped
pin (70).
4. Attach the following accessories to the upright frames and cable ends according to preference:
+ landmine (63, to the base frame near the weight stack), J-hooks (65 & 66), spotting arms
(68 & 69), dip bars (71 & 72), pulley handles (73) and chains (99).