Taurus S2 User Guide
Page 6 / Chapter 2 - HDD Assembly
Be careful not to
d
connected firmly.
damage any cables
or components, an
make sure the
cables are
The LED indication
for HDD1 is
d
5. Install the second hard drive and mount it with two screws
on each side.
6. Connect the SATA and power cables to your hard drives. Be
careful not to damage any components and confirm that the
cables are connected firmly.
7. Slide the inner enclosure back into the outer chassis.
referring to the har
drive connected to
CN2, where HDD2
is referring to CN1.
8. Fasten the four screws to finish the assembly.