Taurus RX7 Assembly And Operating Instructions Manual Download Page 11

Page: 11 / 68

RX7

ASSEMBLY

2.1

General Instructions

⚠

DANGER

Do not leave any tools, packaging materials such as foils or small parts lying around, as

otherwise there is a danger of suffocation for children. Keep children away from the equipment
during assembly.

⚠

WARNING

Pay attention to the instructions attached to the equipment in order to reduce the risk of

injuries.

⚠

CAUTION

Do not open the packaging when it is lying on its side.

Ensure to have sufficient room for movement in each direction during assembly.

The assembly of the equipment must be carried out by at least two adults. If in doubt, seek the

help of another technically skilled person.

ड

ATTENTION

To prevent damage to the equipment and the floor, assemble the equipment on a mat or

packaging board.

NOTICE

In order to make the assembly as simple as possible, some screws and nuts to be used can

already be pre-assembled.

Ideally, assemble the equipment at its later set-up place.

Manufacturer note: The pull strap is equipped with a return spring so that the pull strap is

automatically wound up again. The return spring is equipped with the lowest possible power.

The reason for the light return spring is to give the user a better training effect for the rear

thigh muscles. These muscles are stressed when the user moves the seat forward. If the return

power is strong, the person using the equipment would be pulled.

Summary of Contents for RX7





































































Search results

Summary of Contents for RX7

Reviews:

Related manuals for RX7

Brands by name

Popular brands

Taurus RX7, Assembly And Operating Instructions Manual

Search results

Summary of Contents for RX7

Reviews:

Related manuals for RX7

Brands by name

Popular brands