Taurus RB10.5 Smart, Assembly And Operating Instructions Manual

Page: 16 / 55

RB10.5 Smart
16
Step 2: Cable connection
a) Connect the middle connection cable (130) to the lower connection cable (131). Make
sure that the cables are not stuck.
b) Connect the pulse sensor cable 2 (134) to the pulse sensor cable 3 (135). Make sure that
the cables are not stuck.
Step 3: Assemble console mast
a) Check if two nylon nuts (M10)(126) were pre-mounted on the frame (see small figure in
upper right).
b) Insert the console mast (8) in the main frame (1) and mount it with two screws
(M10xp1.5x50mm) (117). Then tighten the nuts (M10)(126).
Step 4: Assemble console mast covers
a) Mount the front console mast cover (13) on the frame (1) with two screws (M5xp0.8x30mm)
(100).